|
For
in six days the LORD made the heavens and the earth, the sea, and
all that is in them...
|
     |
Copyright © 1999 by Creation Research Society. All rights reserved.
Abstract
The major energy currency molecule of the cell, ATP, is evaluated in the context of creationism. This complex molecule is critical for all life from the simplest to the most complex. It is only one of millions of enormously intricate nanomachines that needs to have been designed in order for life to exist on earth. This molecule is an excellent example of irreducible complexity because it is necessary in its entirety in order for even the simplest form of life to survive.
Introduction
In order to function, every machine requires specific parts such as the screws, springs, cams, gears, and pulleys. Likewise, all biological machines must have many well-engineered parts to work. Examples include units called organs such as the liver, kidney, and heart. These complex life units are made from still smaller parts called cells which in turn are constructed from yet smaller machines known as organelles. Cell organelles include mitochondria, Golgi complexes, microtubules, and centrioles. Even below this level are other parts so small that they are formally classified as macromolecules (large molecules).
A critically important macromolecule—arguably “second in importance only to DNA”—is ATP. ATP is a complex nanomachine that serves as the primary energy currency of the cell (Trefil, 1992, p.93). A nanomachine is a complex precision microscopic-sized machine that fits the standard definition of a machine. ATP is the “most widely distributed high-energy compound within the human body” (Ritter, 1996, p. 301). This ubiquitous molecule is “used to build complex molecules, contract muscles, generate electricity in nerves, and light fireflies. All fuel sources of Nature, all foodstuffs of living things, produce ATP, which in turn powers virtually every activity of the cell and organism. Imagine the metabolic confusion if this were not so: Each of the diverse foodstuffs would generate different energy currencies and each of the great variety of cellular functions would have to trade in its unique currency” (Kornberg, 1989, p. 62).
ATP is an abbreviation for adenosine triphosphate, a complex molecule that contains the nucleoside adenosine and a tail consisting of three phosphates. (See Figure 1 for a simple structural formula and a space filled model of ATP.) As far as known, all organisms from the simplest bacteria to humans use ATP as their primary energy currency. The energy level it carries is just the right amount for most biological reactions. Nutrients contain energy in low-energy covalent bonds which are not very useful to do most of kinds of work in the cells.
Figure 1. Views of ATP and related structures. These low energy bonds must be translated to high energy bonds, and this is a role of ATP. A steady supply of ATP is so critical that a poison which attacks any of the proteins used in ATP production kills the organism in minutes. Certain cyanide compounds, for example, are poisonous because they bind to the copper atom in cytochrome oxidase. This binding blocks the electron transport system in the mitochondria where ATP manufacture occurs (Goodsell, 1996, p.74).
How ATP Transfers Energy Energy is usually liberated from the ATP molecule to do work in the cell by a reaction that removes one of the phosphate-oxygen groups, leaving adenosine diphosphate (ADP). When the ATP converts to ADP, the ATP is said to be spent. Then the ADP is usually immediately recycled in the mitochondria where it is recharged and comes out again as ATP. In the words of Trefil (1992, p. 93) “hooking and unhooking that last phosphate [on ATP] is what keeps the whole world operating.”
The enormous amount of activity that occurs inside each of the approximately one hundred trillion human cells is shown by the fact that at any instant each cell contains about one billion ATP molecules. This amount is sufficient for that cell’s needs for only a few minutes and must be rapidly recycled. Given a hundred trillion cells in the average male, about 1023 or one sextillion ATP molecules normally exist in the body. For each ATP “the terminal phosphate is added and removed 3 times each minute” (Kornberg, 1989, p. 65).
The total human body content of ATP is only about 50 grams, which must be constantly recycled every day. The ultimate source of energy for constructing ATP is food; ATP is simply the carrier and regulation-storage unit of energy. The average daily intake of 2,500 food calories translates into a turnover of a whopping 180 kg (400 lbs) of ATP (Kornberg, 1989, p. 65).
The Structure of ATP ATP contains the purine base adenine and the sugar ribose which together form the nucleoside adenosine. The basic building blocks used to construct ATP are carbon, hydrogen, nitrogen, oxygen, and phosphorus which are assembled in a complex that contains the number of subatomic parts equivalent to over 500 hydrogen atoms. One phosphate ester bond and two phosphate anhydride bonds hold the three phosphates (PO4) and the ribose together. The construction also contains a b-N glycoside bond holding the ribose and the adenine together.
Phosphates are well-known high-energy molecules, meaning that comparatively high levels of energy are released when the phosphate groups are removed. Actually, the high energy content is not the result of simply the phosphate bond but the total interaction of all the atoms within the ATP molecule.
Because the amount of energy released when the phosphate bond is broken is very close to that needed by the typical biological reaction, little energy is wasted. Generally, ATP is connected to another reaction—a process called coupling which means the two reactions occur at the same time and at the same place, usually utilizing the same enzyme complex. Release of phosphate from ATP is exothermic (a reaction that gives off heat) and the reaction it is connected to is endothermic (requires energy input in order to occur). The terminal phosphate group is then transferred by hydrolysis to another compound, a process called phosphorylation, producing ADP, phosphate (Pi) and energy.
Figure 2. The two-dimensional stick model of adenosine phosphate family of molecules, showing the atom and bond arrangement.
The self-regulation system of ATP has been described as follows:
The high-energy bonds of ATP are actually rather unstable bonds. Because they are unstable, the energy of ATP is readily released when ATP is hydrolyzed in cellular reactions. Note that ATP is an energy-coupling agent and not a fuel. It is not a storehouse of energy set aside for some future need. Rather it is produced by one set of reactions and is almost immediately consumed by another. ATP is formed as it is needed, primarily by oxidative processes in the mitochondria. Oxygen is not consumed unless ADP and a phosphate molecule are available, and these do not become available until ATP is hydrolyzed by some energy-consuming process. Energy metabolism is therefore mostly self-regulating (Hickman, Roberts, and Larson, 1997, p.43). [Italics mine]
ATP is not excessively unstable, but it is designed so that its hydrolysis is slow in the absence of a catalyst. This insures that its stored energy is “released only in the presence of the appropriate enzyme” (McMurry and Castellion, 1996, p. 601).
The Function of ATP The ATP is used for many cell functions including transport work moving substances across cell membranes. It is also used for mechanical work, supplying the energy needed for muscle contraction. It supplies energy not only to heart muscle (for blood circulation) and skeletal muscle (such as for gross body movement), but also to the chromosomes and flagella to enable them to carry out their many functions. A major role of ATP is in chemical work, supplying the needed energy to synthesize the multi-thousands of types of macromolecules that the cell needs to exist.
ATP is also used as an on-off switch both to control chemical reactions and to send messages. The shape of the protein chains that produce the building blocks and other structures used in life is mostly determined by weak chemical bonds that are easily broken and remade. These chains can shorten, lengthen, and change shape in response to the input or withdrawal of energy. The changes in the chains alter the shape of the protein and can also alter its function or cause it to become either active or inactive.
The ATP molecule can bond to one part of a protein molecule, causing another part of the same molecule to slide or move slightly which causes it to change its conformation, inactivating the molecule. Subsequent removal of ATP causes the protein to return to its original shape, and thus it is again functional. The cycle can be repeated until the molecule is recycled, effectively serving as an on and off switch (Hoagland and Dodson, 1995, p.104). Both adding a phosphorus (phosphorylation) and removing a phosphorus from a protein (dephosphorylation) can serve as either an on or an off switch.
How is ATP Produced? ATP is manufactured as a result of several cell processes including fermentation, respiration and photosynthesis. Most commonly the cells use ADP as a precursor molecule and then add a phosphorus to it. In eukaryotes this can occur either in the soluble portion of the cytoplasm (cytosol) or in special energy-producing structures called mitochondria. Charging ADP to form ATP in the mitochondria is called chemiosmotic phosphorylation. This process occurs in specially constructed chambers located in the mitochondrion’s inner membranes.
The mitochondrion itself functions to produce an electrical chemical gradient—somewhat like a battery—by accumulating hydrogen ions in the space between the inner and outer membrane. This energy comes from the estimated 10,000 enzyme chains in the membranous sacks on the mitochondrial walls. Most of the food energy for most organisms is produced by the electron transport chain. Cellular oxidation in the Krebs cycle causes an electron build-up that is used to push H+ ions outward across the inner mitochondrial membrane (Hickman et al., 1997, p. 71).
As the charge builds up, it provides an electrical potential that releases its energy by causing a flow of hydrogen ions across the inner membrane into the inner chamber. The energy causes an enzyme to be attached to ADP which catalyzes the addition of a third phosphorus to form ATP. Plants can also produce ATP in this manner in their mitochondria but plants can also produce ATP by using the energy of sunlight in chloroplasts as discussed later. In the case of eukaryotic animals the energy comes from food which is converted to pyruvate and then to acetyl coenzyme A (acetyl CoA). Acetyl CoA then enters the Krebs cycle which releases energy that results in the conversion of ADP back into ATP.
How does this potential difference serve to reattach the phosphates on ADP molecules? The more protons there are in an area, the more they repel each other. When the repulsion reaches a certain level, the hydrogens ions are forced out of a revolving-door-like structure mounted on the inner mitochondria membrane called ATP synthase complexes. This enzyme functions to reattach the phosphates to the ADP molecules, again forming ATP.
The ATP synthase revolving door resembles a molecular water wheel that harnesses the flow of hydrogen ions in order to build ATP molecules. Each revolution of the wheel requires the energy of about nine hydrogen ions returning into the mitochondrial inner chamber (Goodsell, 1996, p.74). Located on the ATP synthase are three active sites, each of which converts ADP to ATP with every turn of the wheel. Under maximum conditions, the ATP synthase wheel turns at a rate of up to 200 revolutions per second, producing 600 ATPs during that second.
ATP is used in conjunction with enzymes to cause certain molecules to bond together. The correct molecule first docks in the active site of the enzyme along with an ATP molecule. The enzyme then catalyzes the transfer of one of the ATP phosphates to the molecule, thereby transferring the energy stored in the ATP molecule. Next a second molecule docks nearby at a second active site on the enzyme. The phosphate is then transferred to it, providing the energy needed to bond the two molecules now attached to the enzyme. Once they are bonded, the new molecule is released. This operation is similar to using a mechanical jig to properly position two pieces of metal which are then welded together. Once welded, they are released as a unit and the process then can begin again.
A Double Energy Packet Although ATP contains the amount of energy necessary for most reactions, at times more energy is required. The solution is for ATP to release two phosphates instead of one, producing an adenosine monophosphate (AMP) plus a chain of two phosphates called a pyrophosphate. How adenosine monophosphate is built up into ATP again illustrates the precision and the complexity of the cell energy system. The enzymes used in glycolysis, the citric acid cycle, and the electron transport system, are all so precise that they will replace only a single phosphate. They cannot add two new phosphates to an AMP molecule to form ATP.
The solution is an intricate enzyme called adenylate kinase which transfers a single phosphate from an ATP to the AMP, producing two ADP molecules. The two ADP molecules can then enter the normal Krebs cycle designed to convert ADP into ATP. Adenylate kinase requires an atom of magnesium—and this is one of the reasons why sufficient dietary magnesium is important.
Adenylate kinase is a highly organized but compact enzyme with its active site located deep within the molecule. The deep active site is required because the reactions it catalyzes are sensitive to water. If water molecules lodged between the ATP and the AMP, then the phosphate might break ATP into ADP and a free phosphate instead of transferring a phosphate from ATP to AMP to form ADP.
To prevent this, adenylate kinase is designed so that the active site is at the end of a channel deep in the structure which closes around AMP and ATP, shielding the reaction from water. Many other enzymes that use ATP rely on this system to shelter their active site to prevent inappropriate reactions from occurring. This system ensures that the only waste that occurs is the normal wear, tear, repair, and replacement of the cell’s organelles.
Pyrophosphates and pyrophosphoric acid, both inorganic forms of phosphorus, must also be broken down so they can be recycled. This phosphate breakdown is accomplished by the inorganic enzyme pyrophosphatase which splits the pyrophosphate to form two free phosphates that can be used to charge ATP (Goodsell, 1996, p.79). This system is so amazingly efficient that it produces virtually no waste, which is astounding considering its enormously detailed structure. Goodsell (1996, p. 79) adds that “our energy-producing machinery is designed for the production of ATP; quickly, efficiently, and in large quantity.”
The main energy carrier the body uses is ATP, but other energized nucleotides are also utilized such as thymine, guanine, uracil, and cytosine for making RNA and DNA. The Krebs cycle charges only ADP, but the energy contained in ATP can be transferred to one of the other nucleosides by means of an enzyme called nucleoside diphosphate kinase. This enzyme transfers the phosphate from a nucleoside triphosphate, commonly ATP, to a nucleoside diphosphate such as guanosine diphosphate (GDP) to form guanosine triphosphate (GTP).
The nucleoside diphosphate kinase works by one of its six active sites binding nucleoside triphosphate and releasing the phosphate which is bonded to a histidine. Then the nucleoside triphosphate, which is now a diphosphate, is released, and a different nucleoside diphosphate binds to the same site—and as a result the phosphate that is bonded to the enzyme is transferred, forming a new triphosphate. Scores of other enzymes exist in order for ATP to transfer its energy to the various places where it is needed. Each enzyme must be specifically designed to carry out its unique function, and most of these enzymes are critical for health and life.
The body does contain some flexibility, and sometimes life is possible when one of these enzymes is defective—but the person is often handicapped. Also, back-up mechanisms sometimes exist so that the body can achieve the same goals through an alternative biochemical route. These few simple examples eloquently illustrate the concept of over-design built into the body. They also prove the enormous complexity of the body and its biochemistry.
The Message of the MoleculeWithout ATP, life as we understand it could not exist. It is a perfectly-designed, intricate molecule that serves a critical role in providing the proper size energy packet for scores of thousands of classes of reactions that occur in all forms of life. Even viruses rely on an ATP molecule identical to that used in humans. The ATP energy system is quick, highly efficient, produces a rapid turnover of ATP, and can rapidly respond to energy demand changes (Goodsell, 1996, p.79).
Furthermore, the ATP molecule is so enormously intricate that we are just now beginning to understand how it works. Each ATP molecule is over 500 atomic mass units (500 u). In manufacturing terms, the ATP molecule is a machine with a level of organization on the order of a research microscope or a standard television (Darnell, Lodish, and Baltimore, 1996).
Among the questions evolutionists must answer include the following, “How did life exist before ATP?” “How could life survive without ATP since no form of life we know of today can do that?” and “How could ATP evolve and where are the many transitional forms required to evolve the complex ATP molecule?” No feasible candidates exist and none can exist because only a perfect ATP molecule can properly carry out its role in the cell.
In addition, a potential ATP candidate molecule would not be selected for by evolution until it was functional and life could not exist without ATP or a similar molecule that would have the same function. ATP is an example of a molecule that displays irreducible complexity which cannot be simplified and still function (Behe, 1996). ATP could have been created only as a unit to function immediately in life and the same is true of the other intricate energy molecules used in life such as GTP.
Although other energy molecules can be used for certain cell functions, none can even come close to satisfactorily replacing all the many functions of ATP. Over 100,000 other detailed molecules like ATP have also been designed to enable humans to live, and all the same problems related to their origin exist for them all. Many macromolecules that have greater detail than ATP exist, as do a few that are less highly organized, and in order for life to exist all of them must work together as a unit.
The Contrast between Prokaryotic and
Eukaryotic ATP Production An enormous gap exists between prokaryote (bacteria and cyanobacteria) cells and eukaryote (protists, plants and animals) type of cells:
...prokaryotes and eukaryotes are profoundly different from each other and clearly represent a marked dichotomy in the evolution of life. . . The organizational complexity of the eukaryotes is so much greater than that of the prokaryotes that it is difficult to visualize how a eukaryote could have arisen from any known prokaryote (Hickman et al., 1997, p. 39).
Some of the differences are that prokaryotes lack organelles, a cytoskeleton, and most of the other structures present in eukaryotic cells. Consequently, the functions of most organelles and other ultrastructure cell parts must be performed in bacteria by the cell membrane and its infoldings called mesosomes.
The Four Major Methods of Producing ATP A crucial difference between prokaryotes and eukaryotes is the means they use to produce ATP. All life produces ATP by three basic chemical methods only: oxidative phosphorylation, photophosphorylation, and substrate-level phosphorylation (Lim, 1998, p. 149). In prokaryotes ATP is produced both in the cell wall and in the cytosol by glycolysis. In eukaryotes most ATP is produced in chloroplasts (for plants), or in mitochondria (for both plants and animals). No means of producing ATP exists that is intermediate between these four basic methods and no transitional forms have ever been found that bridge the gap between these four different forms of ATP production. The machinery required to manufacture ATP is so intricate that viruses are not able to make their own ATP. They require cells to manufacture it and viruses have no source of energy apart from cells.
In prokaryotes the cell membrane takes care of not only the cell’s energy-conversion needs, but also nutrient processing, synthesizing of structural macromolecules, and secretion of the many enzymes needed for life (Talaro and Talaro, 1993, p. 77). The cell membrane must, for this reason be compared with the entire eukaryote cell ultrastructure which performs these many functions. No simple means of producing ATP is known and prokaryotes are not by any means simple. They contain over 5,000 different kinds of molecules and can use sunlight, organic compounds such as carbohydrates and inorganic compounds as sources of energy to manufacture ATP.
Another example of the cell membrane in prokaryotes assuming a function of the eukaryotic cell ultrastructure is as follows: Their DNA is physically attached to the bacterial cell membrane and DNA replication may be initiated by changes in the membrane. These membrane changes are in turn related to the bacterium’s growth. Further, the mesosome appears to guide the duplicated chromatin bodies into the two daughter cells during cell division (Talaro and Talaro, 1993).
In eukaryotes the mitochondria produce most of the cell’s ATP (anaerobic glycolysis also produces some) and in plants the chloroplasts can also service this function. The mitochondria produce ATP in their internal membrane system called the cristae. Since bacteria lack mitochondria, as well as an internal membrane system, they must produce ATP in their cell membrane which they do by two basic steps. The bacterial cell membrane contains a unique structure designed to produce ATP and no comparable structure has been found in any eukaryotic cell (Jensen, Wright, and Robinson, 1997).
In bacteria, the ATPase and the electron transport chain are located inside the cytoplasmic membrane between the hydrophobic tails of the phospholipid membrane inner and outer walls. Breakdown of sugar and other food causes the positively charged protons on the outside of the membrane to accumulate to a much higher concentration than they are on the membrane inside. This creates an excess positive charge on the outside of the membrane and a relatively negative charge on the inside.
The result of this charge difference is a dissociation of H2O molecules into H+ and OH– ions. The H+ ions that are produced are then transported outside of the cell and the OH– ions remain on the inside. This results in a potential energy gradient similar to that produced by charging a flashlight battery. The force the potential energy gradient produces is called a proton motive force that can accomplish a variety of cell tasks including converting ADP into ATP.
In some bacteria such as Halobacterium this system is modified by use of bacteriorhodopsin, a protein similar to the sensory pigment rhodopsin used in the vertebrate retina (Lim, 1998, p. 166). Illumination causes the pigment to absorb light energy, temporarily changing rhodopsin from a trans to a cis form. The trans to cis conversion causes deprotonation and the transfer of protons across the plasma membrane to the periplasm.
The proton gradient that results is used to drive ATP synthesis by use of the ATPase complex. This modification allows bacteria to live in low oxygen but rich light regions. This anaerobic ATP manufacturing system, which is unique to prokaryotes, uses a chemical compound other than oxygen as a terminal electron acceptor (Lim, 1998, p. 168). The location of the ATP producing system is only one of many major contrasts that exist between bacterial cell membranes and mitochondria.
ChloroplastsChloroplasts are double membraned ATP-producing organelles found only in plants. Inside their outer membrane is a set of thin membranes organized into flattened sacs stacked up like coins called thylakoids (Greek thylac or sack, and oid meaning like). The disks contain chlorophyll pigments that absorb solar energy which is the ultimate source of energy for all the plant’s needs including manufacturing carbohydrates from carbon dioxide and water (Mader, 1996, p. 75). The chloroplasts first convert the solar energy into ATP stored energy, which is then used to manufacture storage carbohydrates which can be converted back into ATP when energy is needed.
The chloroplasts also possess an electron transport system for producing ATP. The electrons that enter the system are taken from water. During photosynthesis, carbon dioxide is reduced to a carbohydrate by energy obtained from ATP (Mader, 1996, p. 12). Photosynthesizing bacteria (cyanobacteria) use yet another system. Cyanobacteria do not manufacture chloroplasts but use chlorophyll bound to cytoplasmic thylakoids. Once again plausible transitional forms have never been found that can link these two forms of ATP production from the photosynthesis system.
The two most common evolutionary theories of the origin of the mitochondria-chloroplast ATP production system are 1) endosymbiosis of mitochondria and chloroplasts from the bacterial membrane system and 2) the gradual evolution of the prokaryote cell membrane system of ATP production into the mitochondria and chloroplast systems. Believers in endosymbiosis teach that mitochondria were once free-living bacteria, and that “early in evolution ancestral eukaryotic cells simply ate their future partners” (Vogel, 1998, p. 1633). Both the gradual conversion and endosymbiosis theory require many transitional forms, each new one which must provide the animal with a competitive advantage compared with the unaltered animals.
The many contrasts between the prokaryotic and eukaryotic means of producing ATP, some of which were noted above, are strong evidence against the endosymbiosis theory. No intermediates to bridge these two systems has ever been found and arguments put forth in the theory’s support are all highly speculative. These and other problems have recently become more evident as a result of recent major challenges to the standard endosymbiosis theory. The standard theory has recently been under attack from several fronts, and some researchers are now arguing for a new theory:
Scientists pondering how the first complex cell came together say the new idea could solve some nagging problems with the prevailing theory... “[the new theory is]... elegantly argued,” says Michael Gray of Dalhouisie University in Halifax, Nova Scotia, but “there are an awful lot of things the hypothesis doesn’t account for.” In the standard picture of eukaryote evolution, the mitochondrion was a lucky accident. First, the ancestral cell—probably an archaebacterium, recent genetic analyses suggest—acquired the ability to engulf and digest complex molecules. It began preying on its microbial companions. At some point, however, this predatory cell didn’t fully digest its prey, and an even more successful cell resulted when an intended meal took up permanent residence and became the mitochondrion. For years, scientists had thought they had examples of the direct descendants of those primitive eukaryotes: certain protists that lack mitochondria. But recent analysis of the genes in those organisms suggests that they, too, once carried mitochondria but lost them later (Science, 12 September 1997, p. 1604). These findings hint that eukaryotes might somehow have acquired their mitochondria before they had evolved the ability to engulf and digest other cells (Vogel, 1998, p. 1633).
Summary In this brief review we have examined only one cell macromolecule, ATP, and the intricate mechanisms which produce it. We have also looked at the detailed supporting mechanism which allows the ATP molecule to function. ATP is only one of hundreds of thousands of essential molecules, each one that has a story. As each of those stories is told, they will stand as a tribute to both the genius and the enormously complex design of the natural world. All the books in the largest library in the world may not be able to contain the information needed to understand and construct the estimated 100,000 complex macromolecule machines used in humans. Much progress has been made in understanding the structure and function of organic macromolecules and some of the simpler ones are now being manufactured by pharmaceutical firms.
Now that scientists understand how some of these highly organized molecules function and why they are required for life, their origin must be explained. We know only four basic methods of producing ATP: in bacterial cell walls, in the cytoplasm by photosynthesis, in chloroplasts, and in mitochondria. No transitional forms exist to bridge these four methods by evolution. According to the concept of irreducible complexity, these ATP producing machines must have been manufactured as functioning units and they could not have evolved by Darwinism mechanisms. Anything less than an entire ATP molecule will not function and a manufacturing plant which is less then complete cannot produce a functioning ATP. Some believe that the field of biochemistry which has achieved this understanding has already falsified the Darwinian world view (Behe, 1996).*
References Behe, Michael. 1996. Darwin’s black box: The biochemical challenge to evolution. The Free Press. New York.
Darnell, James, Harvey Lodish, and David Baltimore. 1996. Molecular cell biology, 3rd edition. W.H. Freeman. New York.
Goodsell, David S. 1996. Our molecular nature. Springer-Verlag. New York.
Hickman, Cleveland P. 1997. Integrated principles of zoology, 10th edition. William C. Brown/McGraw Hill. New York.
Hickman, Cleveland P., Larry Roberts, and Allan Larson. 1997. The biology of animals, 7th edition. William C. Brown/McGraw Hill. New York.
Hoagland, Mahlon and Bert Dodson. 1995. The way life works. Random House. New York.
Jensen, Marcus, Donald Wright, and Richard Robinson. 1997. Microbiology for the health sciences, 4th edition. Prentice-Hall. Upper Saddle River, NJ.
Kornberg, Arthur. 1989. For the love of enzymes. Harvard University Press. Cambridge, MA.
Lim, Daniel. 1998. Microbiology, 2nd edition. William C. Brown/McGraw Hill. New York.
Mader, Sylvia. 1996. Biology, 6th edition. William C. Brown. Dubuque, IA.
McMurry, John and Mary Castellion. 1996. Fundamentals of general, organic, and biological chemistry, 2nd edition. Prentice Hall. Upper Saddle River, NJ.
Ritter, Peck. 1996. Biochemistry, a foundation. Brooks/Cole. Pacific Grove CA.
Talaro, Kathleen and Arthur Talaro. 1993. Foundations in microbiology. William C. Brown. Dubuque, IA.
Trefil, James. 1992. 1001 Things everyone should know about science. Doubleday. New York.
Vogel, Gretchen. 1998. Did the first complex cell eat hydrogen? Science 279: 1633-1634.
© Copyright 2001-2008, Creation
Research Society. All rights reserved.